Hello everyone,

Machine software was cleaned then We installed software but system don't open. There is a error on the machine.

We changed memory board but it didn't change. Maybe our board is broken but we can't be sure. Do you have a advice for us?

Memory TEST:0000
LOAD:SYS
1-2 CPU-ALARM BUS ERROR (SYSTEM BUS PARITY)
BUS ERROR STATUS(SBER,SBPAR,CYO,0,PRT,DIA,LOP,ECC)=40
SSW=0145 ACCESS ADDRESS=003E7FF4
D0=FCC00000 D1=00000000 D2=00840000 D3=00000000
D4=003FCF00 D5=003FCFFE D6=00009000 D7=7CBFFFFF
A0=E7FFFF22 A1=00000000 A2=FCCA0000 A3=00001A44
A4=003F2024 A5=FCC00000 A6=00001000 A7=003E7FF4
US=BFFBDFEF IS=003E7FF4 MS=F9FDBAFF SR=00002000
PC=003F3400