...so, the Yaskawa worked with Param A1-02 set at 3 (Closed Loop) without the Encoder. That doesn't make sense. The drive should have faulted out #10
...so, the Yaskawa worked with Param A1-02 set at 3 (Closed Loop) without the Encoder. That doesn't make sense. The drive should have faulted out #10
...well, I see a 1010-4 Card on ebay with ELE-0025 Chipset that are in horrible condition. (I've seen better n worse $500 chips...lol ) But, at the price the seller Offer to me ($100) because I put it on my watch List for the photos might be worth it..If the seller has guaranteed to work.
https://www.ebay.com/itm/18549750824...Bk9SR_bqgb2VYQ
Nexgen (406) 600-0624 is one of original Fadal Engineers that build Fadal's and the last time I called them (few years back) they answer all my question how to get a 4th axis setup...No Charge. We talked for 45 mins. So, I would call them after the Holiday and chat with them if, all else fails.
Keep us posted,
DJ