[J&RMachine]

I have bobcad 21 and I have a lathe with fanuc oi-tc control. My cd with post processors no longer works. I have been using a post processor for fanuc 18 it and I can get it to work but it does some things that are kind of unhandy. For 1 thing it tries to post in radius rather dia. if I dont click on the Y=Y*2 under envirorment. Another thing is unless I click on no numbers it outputs strange things when posting a code for a G71 cycle. If I click on no numbers it works ok but I have to do this every time I open bobcad. Another thing is it leaves out "G00" on the first line of code after a G71 and the machine wont run like this unless I manually insert a G00 after the G71 cycles.

[machinehop5]

...do you have an app File named "LatheEditPost" look in BobCad21 folder. If not, you can try using the attached program from BC23 that I have might work for ya.

DJ