[TempestDon]

I am upgrading my CNC to closed loop motors, which required me to get a new controller. I am trying to figure out how to set up the current Lenze VFD with my new C11G controller. Things aren't labeled the same, and I am inexperienced enough to now know how to translate between them.

The C11G wiring diagram and the description of the Lenze VFD terminals are both attached. I'm thinking it would be set up like this, (but nothing is working yet in Mach 3, so I don't have something quite right):

VFD 11 would provide 12vDC to 12vdc input
VDF 5 would go to 0-10V input
VFD 2 would go to ACM
VFD 1 would go to Forward
VFD 4 would go to DCM
I don't use reverse, so I don't think I need anything?

If you have any different opinions or advice, I would sure love to hear them.

Thanks,
Don