Hi, guys !
This is my first post here and I am glad to join your community.
I would like to get some advice on how to force my 775 motor on T8 CNC machine to rotate faster.
I have SVEN PU-600AN (see photo) which gives enough power (480W /40A) for spindel and steppers, but limited to only 12V. To increase rotation speed I would like to step-up the voltage without losing the power. I see many DC/DC 12V/24V converters on the market, but they are very expensive (compared to my T8), so I am looking for optimal solution.
Any suggestions, please !
Thanks in advance.
775 motor specifications:
https://somanytech.com/what-is-775-motor/
T8 specifications:
https://hobbyking.com/en_us/t8-diy-3...-and-grbl.html