Hi folks,

I'm printing a part that is about 204 mm long on the X axis and 10 mm tall. However, the heigh on the left side is 10.59 mm and on the right side is 9.42 mm.

The solid in Fusion 360 has the correct dimensions. I'm printing 6 units at a time, so it is a 14-hour print. The printer is a Creality Ender 3 S1 Pro. I'm new to 3D printing. I think the bed is leveled, evidenced by a good 1st layer adhesion. You can kind of see a squishing of the bottom layers on the shorter side in the second picture.

On a different part with a 5 mm height, I saw a similar problem where the left side was 5.23 and the right side 4.33.

Thoughts?


Attachment 487132

Attachment 487134