585,931 active members*
5,049 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Loading program problem - osp-u100m

Thread: Loading program problem - osp-u100m

Results 1 to 1 of 1
  1. 12-18-2022, 10:46 AM #1
    saeedmohamed
    saeedmohamed is offline Member
    Join Date
    Dec 2022
    Posts
    4

    Loading program problem - osp-u100m

    Hello everyone,

    I have a problem with my Okuma osp-u100m when I select any program and the machine started to load it an error occurs as attached pic. Then I found that in the control box a board holding two hard disk LEDs are red color attached to the pic 2 also.

    Please if anyone had an experience with this problem guide me because the machine is totally stopped

    Thanks in advance
    Attached Thumbnails Attached Thumbnails 319095727_3367906883487950_2177623009483040650_n.jpg   320878690_695175222227225_2193210043597973584_n.jpg  
    Last edited by saeedmohamed; 12-18-2022 at 11:38 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules