have a komo cnc w/ a faunc o-m series controller. after sending machine to home. I got all of these alarms xyz cant rember all the #,s but 417 but got it on all axis. Ifigured out that all of my parameters were all messed up. i fixed them all manulally and got the alarms off. then i had to re home the machine. i set the pwe to 1 got the alarm when i re set the value for the x y z. then i got a 000 alarm. i turned off the cotroller then turned it back on only to have all my original alarms back 417 etc. and all of my parms were all different..any ideas.
Thread: o-m series alarm issues.
Results 1 to 2 of 2
-
09-18-2007, 01:45 AM #1
Registered
- Join Date
- Sep 2007
- Posts
- 0
o-m series alarm issues.
-
09-18-2007, 03:44 PM #2
Registered
- Join Date
- Sep 2005
- Posts
- 767
Is your battery dead?
Reply With QuoteSimilar Threads
-
What is the Difference between 6000 series aluminium and 7000 series
By Kosta1234 in forum Material Machining SolutionsReplies: 4Last Post: 05-02-2018, 04:02 PM -
TechoCNC LC series issues
By Python in forum Commercial CNC Wood RoutersReplies: 5Last Post: 11-25-2007, 03:12 AM -
BP Series 1 with Mach3- Z axis limits issues
By bbuonomo in forum Bridgeport / Hardinge MillsReplies: 6Last Post: 10-13-2006, 10:39 AM
Posting Permissions
