Just wondering if anyone knows the correct paint color for our m/c; 1994 model mx-55va v.m.c.; mostly a creamy white color with blue high lights.
had the gaurds off today to see if the lead screw preload nuts are the same on the y and z axis, if anyones wondering, they are; 6 hole spanner approx 40mm pcd. any help on the correct paint colour would be most appreciated.
Thread: OKUMA MX-55VA, paint color???
Results 1 to 4 of 4
-
09-18-2007, 06:33 AM #1
Registered
- Join Date
- Jul 2007
- Posts
- 27
OKUMA MX-55VA, paint color???
-
09-19-2007, 01:03 AM #2
Registered
- Join Date
- Sep 2007
- Posts
- 217
Contact gossigner I am sure they know.
-
10-08-2007, 06:40 AM #3
Registered
- Join Date
- Jul 2007
- Posts
- 27
Thanks for the help. Contacted the okuma guys again and this time they're trying to chase it up for me. i'll post the correct colour when i get a reply back from them (in about 2 months i'm guessing!)
-
10-08-2007, 01:57 PM #4
Registered
- Join Date
- Jan 2004
- Posts
- 539
higgo,
Not sure about down under...but most larger paint stores, auto and house paint, have scanners are pretty amazing on metallics. For a solid color it would be a snap. If you can get something small off the machine to scan that is..
Gary
Reply With QuoteSimilar Threads
-
color cnc painter
By publitime in forum Printing, Scanners, Vinyl cutting and PlottersReplies: 26Last Post: 11-09-2009, 02:14 AM -
changing color
By fastolds in forum GibbsCAMReplies: 9Last Post: 01-27-2006, 08:17 PM -
Emc color button
By essa in forum LinuxCNC (formerly EMC2)Replies: 2Last Post: 11-21-2005, 03:19 PM -
Wire Color
By HillBilly in forum CNC Machine Related ElectronicsReplies: 1Last Post: 07-26-2004, 06:04 PM -
A Color CNC painter
By justCNCit in forum Printing, Scanners, Vinyl cutting and PlottersReplies: 2Last Post: 01-12-2004, 10:14 PM
Posting Permissions
