584,829 active members*
4,798 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Sanyo Denki Driver info needed
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2023
    Posts
    1

    Sanyo Denki Driver info needed

    Hello,

    Does anyone have a user manual for PM-UDPD2A01-32? Even pin-outs would be helpful at this point. Motor and power are pretty obvious, but there appear to be 2+ control connectors that are slightly different.

    Also, are those ethernet ports etherCAT or just plain old ethernet?

    Thanks,
    Joe

  2. #2
    Join Date
    Mar 2024
    Posts
    2

    Re: Sanyo Denki Driver info needed

    Hi jkork,
    I need a UDPD manual, too - did you get something?
    BRW, you know if the UDPD is compatible with SANMOTION_R_T software?
    Thank you very much!
    Rudi

  3. #3
    Join Date
    Mar 2024
    Posts
    2

    Re: Sanyo Denki Driver info needed

    ...one more point.
    In the electrical drawing I have, the two communication ports are described as RS422 (connector looks RJ style) and several of these UDPDs are daisy-chained.
    Rudi

Similar Threads

  1. Sanyo Denki spindle drive info needed
    By zafarsalam in forum Servo Motors / Drives
    Replies: 2
    Last Post: 01-14-2015, 03:28 PM
  2. Servo driver manual sanyo denki help
    By ELCIO2017 in forum Controller Cards
    Replies: 0
    Last Post: 10-23-2014, 02:55 PM
  3. Sanyo Denki PM Driver
    By Florin in forum Stepper Motors / Drives
    Replies: 3
    Last Post: 06-25-2009, 02:21 AM
  4. Sanyo Denki info required
    By edmond in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 04-07-2007, 11:18 AM
  5. Sanyo- Denki Step Syn motors need some help on driver for
    By rollin_ballz1 in forum DIY CNC Router Table Machines
    Replies: 0
    Last Post: 03-07-2006, 03:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •