565,467 active members*
1,996 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Postprocessor for CAM > EMCO PCTURN 55 Post Processor
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Oct 2008
    Posts
    2

    EMCO PCTURN 55 Post Processor

    Good day everyone,
    I have an "old" Emco PCTURN 55 lathe and am trying to get HSMWORKS 2016 to post out in a proper format which my lath will use. I have done a fair share of manually writing the code but it is not as quick of course and using a program to write the code.

    Can anyone help me out with a post processer that will work? HSMWORKS is to my understanding quite close to Fusion360.

    Thank you.....

  2. #2
    Member
    Join Date
    Jan 2005
    Posts
    15112

    Re: EMCO PCTURN 55 Post Processor

    Quote Originally Posted by mustangdan View Post
    Good day everyone,
    I have an "old" Emco PCTURN 55 lathe and am trying to get HSMWORKS 2016 to post out in a proper format which my lath will use. I have done a fair share of manually writing the code but it is not as quick of course and using a program to write the code.

    Can anyone help me out with a post processer that will work? HSMWORKS is to my understanding quite close to Fusion360.

    Thank you.....
    You have the G-Code format that works for you lathe, so just choose a postprocessor that outputs close to what you need, then edit it with the postprocessor editor in HSMWORKS, I'm sure there are also video on how to use their editor.
    Mactec54

  3. #3
    Member
    Join Date
    Jan 2005
    Posts
    15112

    Re: EMCO PCTURN 55 Post Processor

    Here is how to use the Editor.
    Mactec54

  4. #4
    Member
    Join Date
    Oct 2008
    Posts
    2

    Re: EMCO PCTURN 55 Post Processor

    Thank you!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •