565,473 active members*
2,258 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Postprocessor for CAM > POST AMADA LASER 3015NT FOR FABRIWIN
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    May 2009
    Posts
    7

    POST AMADA LASER 3015NT FOR FABRIWIN

    Hi
    Im looking for .DRI file for amada Laser 3015NT.for fabriwin
    I have some post for some machines laser and turret if you need anything just let me know.

    Regards

  2. #2
    Member
    Join Date
    Jan 2023
    Posts
    1

    Re: POST AMADA LASER 3015NT FOR FABRIWIN

    yes i am here kindly let me know how i can apply. https://kohiclicks.com/blog/

  3. #3
    Registered
    Join Date
    May 2009
    Posts
    7

    Re: POST AMADA LASER 3015NT FOR FABRIWIN

    Well I think any .DRI for amada could work code is very simmilar.

Similar Threads

  1. Amada Vela 2 PC upgrade possible? Fabriwin is not seeing the keylock dongle.
    By generalcrafts in forum Bending- and Punching Machines
    Replies: 2
    Last Post: 01-25-2023, 09:05 PM
  2. Fabriwin not seeing keylock/dongle, trying to install on replacement PC Amada Vela 2
    By generalcrafts in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 06-10-2022, 07:59 AM
  3. FabriWIN 2014 vs. Amada Pega Tool Angle Discrepancy
    By ShutterCAD in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 10-31-2017, 07:32 PM
  4. Post Processor/driver for Amada Laser/Fabriwin
    By JTGam1 in forum Post Processor Files
    Replies: 0
    Last Post: 04-12-2017, 06:08 PM
  5. Need punch sequencing advice (Amada/Fabriwin)
    By cdoss in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 04-23-2015, 10:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •