Greetings.
We are using Camworks2007 SP4.2 with Solidworks 2007 SP4.
One of our users has the problem you can see on the screenshot i have attached.
He is the only one working with Windows XP 64, so maybe that is part of the problem? Anyone know anything or had a similar problem?
Any other hint on how to solve this is welcome, too...
Thanks a lot,
Andreas
Thread: Camworks 2007 on a 64bit Windows
Results 1 to 2 of 2
-
09-25-2007, 12:52 PM #1
Registered
- Join Date
- Sep 2007
- Posts
- 2
Camworks 2007 on a 64bit Windows
-
09-28-2007, 01:50 AM #2
Registered
- Join Date
- Feb 2007
- Posts
- 79
64 Bit
I have heard of this problem.......If I understand correctly, it's like this:
Camworks is a 32 BIT program but will run on a 64 BIT computer if loading the complimentary (included) version of Solidworks. However, if you already have the 64 BIT full version of Solidworks installed and load Camworks on top of it, you will have problems........Good Luck.....Call Teksoft
Reply With QuoteSimilar Threads
-
Camworks
By big_mak in forum CamWorksReplies: 9Last Post: 02-13-2017, 04:19 PM -
Camworks
By big_mak in forum CamWorksReplies: 65Last Post: 08-16-2011, 10:08 PM -
camworks 2007 post processor editing
By clt1969 in forum SolidworksReplies: 0Last Post: 10-03-2006, 03:16 PM -
Camworks
By MARKW in forum OneCNCReplies: 6Last Post: 10-29-2005, 02:41 AM -
Windows XP or Windows 2000 better with Mach2
By Beezer in forum Mach Software (ArtSoft software)Replies: 2Last Post: 10-18-2004, 04:08 PM
Posting Permissions
