585,581 active members*
3,828 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > Need info on stepper motors?

Thread: Need info on stepper motors?

Results 1 to 5 of 5
  1. 01-29-2008, 02:20 AM #1
    Oldboy
    Oldboy is offline Registered
    Join Date
    Nov 2007
    Posts
    118

    Need info on stepper motors?

    I read the term Holding power?
    If you have a 425OZ stepper motor and run it in full step mode.
    When its NOT turning will it LOCK up with 425OZ?
    And in 1/8 step mode a 200 per step motor would have 1600 steps?
    And if the same step motor had 1.8 degrees per a step in Full step mode.
    Would it realy have .001125 degrees per a step in 1/8th step mode?
    And only move .0011 per a step?
    Reply With Quote Reply With Quote
  2. 01-29-2008, 03:25 AM #2
    ataxy
    ataxy is offline Registered
    Join Date
    Jul 2005
    Posts
    969
    it should be 0.001125
    The opinions expressed in this post are my own. -Les opinions exprimé dans ce messages sont les mienne
    Reply With Quote Reply With Quote
  3. 01-30-2008, 01:32 AM #3
    Oldboy
    Oldboy is offline Registered
    Join Date
    Nov 2007
    Posts
    118
    What about HOLDING POWER?
    Reply With Quote Reply With Quote
  4. 01-30-2008, 02:34 AM #4
    pminmo
    pminmo is offline Gold Member
    Send a message via AIM to pminmo
    Join Date
    Jun 2003
    Posts
    3312
    For you step size question:http://pminmo.com/PMinMOwiki/index.php5?title=Stepping

    Basically you have teh right concept on holding torque.
    Phil, Still too many interests, too many projects, and not enough time!!!!!!!!
    Vist my websites - http://pminmo.com & http://millpcbs.com
    Reply With Quote Reply With Quote
  5. 01-30-2008, 04:24 AM #5
    Oldboy
    Oldboy is offline Registered
    Join Date
    Nov 2007
    Posts
    118
    Thank You!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. where can I get info about motors?
    By joe aiello in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 05-13-2007, 03:16 AM
  2. need some info on a stepper motors taken from epson printer
    By Fitz in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 07-15-2005, 06:53 PM
  3. need info on sigma stepper motors
    By gv71 in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 06-26-2004, 07:25 AM
  4. I Need Info On 5 Phase Stepper Motors.
    By ljoe1969 in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 01-25-2004, 01:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules