584,829 active members*
5,040 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2004
    Posts
    43

    gcode to gcode converter

    Is there any programs that will change gcode for one machine into gcode for another that doesnt have all the same commands?

  2. #2
    Join Date
    Apr 2003
    Posts
    1876
    None that I'm aware of. Have you tried a google search? A lot of it will depend on what needs to be changed.

    You could write a script (VBS) to read the original then change any codes you need via the REPLACE() function.
    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Mar 2004
    Posts
    43
    what Im trying to do is write programs with canned cycles that I can convert to code that my machine will understand.
    Probably something theres not much of a need for but I dont have a cam for lathe stuff and I wanted to see if there was something like this so I could get a little break doing the programs manually.

  4. #4
    Join Date
    Apr 2003
    Posts
    1876
    If the changes aren't too significant, I'll see if I can come up with a quick script to help you out. Let me know what you're going "from" and what you're going "to", and I'll let you know.

    'Rekd
    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  5. #5
    Join Date
    Jun 2003
    Posts
    205

    Arrow Conversion Software

    Take a look at KipwareXC ... www.kentechinc.com

Similar Threads

  1. Gerber RS724X to Gcode Converter???
    By nickzl in forum G-Code Programing
    Replies: 5
    Last Post: 01-07-2012, 11:37 AM
  2. Gerber RS724X to Gcode Converter???
    By creative_mind in forum Uncategorised CAM Discussion
    Replies: 3
    Last Post: 10-26-2009, 05:44 PM
  3. Is it possible to get a gcode into Rhino
    By MrBean in forum Rhino 3D
    Replies: 11
    Last Post: 04-03-2005, 01:41 PM
  4. 3phase servo retrofit
    By whiteriver in forum Servo Motors / Drives
    Replies: 35
    Last Post: 02-07-2005, 04:27 AM
  5. Gcode verify autocad plugin
    By balsaman in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 10-31-2003, 06:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •