584,874 active members*
5,218 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2012
    Posts
    8

    Matsuura MC-600V ERROR and ALARM

    Hi,

    I am using a Matsuura MC-600V with a MX3 Yasnac controller.

    I had a program running when it did a tool change the machine came up with an error and alarm that will not go away.

    182: SEQ ERROR2

    424: TOOL TABLE ERROR


    The tool was placed in the spindle ok, and the old tool was placed in the pocket. The pocket stayed down and never went up.


    Any one know how to clear this error?

    Is there a way to move the arm manually to check if it is in the correct location?

    Thanks,

    Saul

  2. #2
    Join Date
    Oct 2012
    Posts
    8

    #6219 toggled, everything ok.

    Hi,

    Just toggled SETTING #6219...

    Everything ok now..

    Thanks,

    Saul

  3. #3
    Join Date
    May 2012
    Posts
    12

    Re: #6219 toggled, everything ok.

    Reviving this old thread. At tool change arm his spindle and dropped tool, I have the SEQ 282 error and the 434 tool table error. I put the arm back into position manually but can not toggle #6219??? I have the manual to reset tool table but even though I replace arm, I still get error. Unsure if it wont let me toggle #6219 since it is in alarm???

    any help is appreciated.

    Dan

  4. #4
    Join Date
    May 2012
    Posts
    12

    Re: #6219 toggled, everything ok.

    Never mind, I was in parameters not settings

Similar Threads

  1. Matsuura Mc500v seq error/magazine error
    By mc500v in forum Uncategorised MetalWorking Machines
    Replies: 12
    Last Post: 10-19-2020, 04:57 PM
  2. ALARM!! TOOL TABLE ERROR'' MC MATSUURA 510V
    By victorcnc in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 05-18-2020, 02:59 PM
  3. Matsuura MC 500 V alarm 04.27 z positionning error
    By modjo in forum Uncategorised MetalWorking Machines
    Replies: 4
    Last Post: 04-27-2013, 01:54 AM
  4. help matsuura alarm!!!!!
    By victorcnc in forum CNC Machining Centers
    Replies: 0
    Last Post: 03-08-2011, 02:07 AM
  5. Matsuura MC-760-DC alarm 61
    By brad63av in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 05-15-2008, 06:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •