Have a problem on Conquest T51 when I cannot move X axis in minus direction.
X axis moves fine in positive, Z moves - and + fine, but when press X- no movement.
No alarms other than a message that all axis need to be homed but have to move 1" in negative direction before can start homing in both z and x.

Things I have tested:
Servo is decoupled from the machine so no binding, tested servo and cables by connecting it as a Z axis and it works fine both directions so servo and cables are good.
I changed out amplifier with a known working one.
Soft limit set to -9999999 and +99999999, hard limits (G114 and G116) are all 1 for all available axes.
The interlock signals *IT and*IT0-5 are all 1
The SVF signals are 0
G134 are all 0
All conditions in the ladder are met to move axis, G102.0 turn ON.