584,800 active members*
4,425 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > PowerMILL > Any idea why this happens?
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2017
    Posts
    4

    Any idea why this happens?

    Hello everyone!
    I'm trying to familiarize myself with 5 axis toolpaths and have been looking every single material that would help me.
    Started to test what I've learned and everything looks normal in PowerMill. The problem comes in when exporting the post. The post processor was supplied by the manufacturer of the 5 axis equipment but when it export the planes are separated by a big margin!
    I don't know if I'm doing something wrong or if it's a problem with the post processor.
    Please look at the attached images and point me in the right direction!

    Thank you!
    Attached Thumbnails Attached Thumbnails pwm.jpg   NCC.jpg  

  2. #2
    Join Date
    Apr 2018
    Posts
    130

    Re: Any idea why this happens?


  3. #3
    Join Date
    Oct 2017
    Posts
    4

    Re: Any idea why this happens?

    No one has ever come accross that kind of situation!?

  4. #4
    Join Date
    Oct 2017
    Posts
    4

    Re: Any idea why this happens?

    Never mind. It is a problem with the postprocessor. This thread can be closed. Thank you very much.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •