I'm trying to parse gcode for a Fanuc 18i-TB lathe, if I run into a G0 according to the manual there has to be at least one axis. How can I destinguish between G0 X10; and G0 X10 X5; is it the linefeed or the EOB ?
I'm trying to parse gcode for a Fanuc 18i-TB lathe, if I run into a G0 according to the manual there has to be at least one axis. How can I destinguish between G0 X10; and G0 X10 X5; is it the linefeed or the EOB ?