[peteeng]

Interesting yes - It has 4 rails for the gantry... Peter I looked up JTC and they have good shots of their structures. But they seem to think that we are Ethiopia?

[ardenum2]

Interesting yes - It has 4 rails for the gantry... Peter I looked up JTC and they have good shots of their structures. But they seem to think that we are Ethiopia?

haha at least you guys got a pin, us and europe didnt get any, I am not surprised

[jaguar36]

here's an interesting one, the ram is a round tube, this would give you some flexibility as to how big you want the ram to be.

That's a pretty common design (or at least a bunch of different Taiwanese/Chinese knockoffs exist). Here's one from Method:

[ardenum2]

theres a few cad models on grabcad that might be helpful

https://grabcad.com/library/dmg_mori...dcg_skeleton-1
https://grabcad.com/library/dmg_mori_dmu40_evolution-1

[peteeng]

Hi Jag - Interesting - haven't seen the counterweight on the trunnion before. Peter

[Mr-MaW]

Trust Mineral Casting, I practiced in a factory in Germany in 2015 to produce mineral castings.
If you want to ensure the reliability of the product, you need to have sufficient design experience and construction experience. Process flow is critical.

https://reiden.com/en/products/94/rx12

This is my product.
https://grabcad.com/library/ma-miner...inear-motors-1

If you need mineral castings.You can contact me, my email: [email protected]
I'm from China,My company has produced a lot of products, small can reach 100KG, large can do 46 tons.
My English is very average and I don't know how to upload photos. Very reason to share my product with you.