Hello,
Looking for someone to manufacture a prototype of a children's play table. It consists of a table and series of draws. Circa 30 parts in total. (title should say 30, not 8!)
Work can be done on a 3 Axis machine but a few of the parts are double sided.
The completed table is circa 600mm by 600mm by 600mm. Thickness of MDF is all either 18mm (majority) 12mm or 9mm.
I have 5 completed STEP files that I can send through, but you would need to do the 'nesting' of these to be CNC ready.
Would ideally like a quote for both CNC AND manufacture (glue), BUT happy to build myself if you'd rather just do the CNC'ing.
regards,
Robert