Hey lads, new to the world of cnc...voluntoldI have haas mini and im am at a loss. I have 6 fixture of which 3 are the from and other 3 reverse. Each fixture has mirror image of other side. I'm finding when I drill a hole they are not matching and if i adjust offset it just moves one closer to the edge of the part not centering on both parts. any idea? I know this is not much to go on but I lack cnc language without your help.
Results 1 to 3 of 3
-
03-29-2023, 12:32 AM #1
Member
- Join Date
- Mar 2023
- Posts
- 1
Newbee "**** happens when your party naked"
-
03-29-2023, 05:05 AM #2
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: Newbee "**** happens when your party naked"
I'm going to go out on a limb here and guess that your fixture offsets are not correct.
Jim Dawson
Sandy, Oregon, USA
-
03-29-2023, 06:46 AM #3
Member
- Join Date
- Jun 2015
- Posts
- 4154
Re: Newbee "**** happens when your party naked"
hy gingervitis
i admire your spontaneity, try to keep it ...
as for the drilling, there is something pretty basically that you may have skipped; look for a haas guy in your area, he should spot the mistake and be able to cover the basiscs pretty fast with you / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
Reply With Quote
Posting Permissions
