584,830 active members*
5,297 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2021
    Posts
    2

    Question PM-25MV Spindle Drive Replacement

    I am in a pickle. My spindle drive has failed on my Precision Matthews PM-25MV. The Precision Matthews support say the controller is out of stock and it could be a loooong time to get a replacement.

    They won't say what the motor voltage is so I'm screwed by them unless I can determine the stock motor voltage so I can replace the drive with another.


    Does anybody know a suitable drive replacement?

    As far as I can tell the drive is
    110 VAC input
    output voltage = UNKNOWN (this is what I am looking to the community for help with)
    0-2500 rpm

    The current drive has a sticker on it with the name DULY.
    Attached Thumbnails Attached Thumbnails 20230409_093237.jpg   20230409_093227.jpg  

  2. #2
    Join Date
    Jan 2018
    Posts
    1516

    Re: PM-25MV Spindle Drive Replacement

    Nope. But I'll be replacing my drive/motor with a Delta AC servo kit at some point. Might be worth looking into.

  3. #3
    Join Date
    Jul 2020
    Posts
    32

    Re: PM-25MV Spindle Drive Replacement

    Can you replace the spindle on the PM-25 with a BT-30 ATC Spindle?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •