585,670 active members*
4,850 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Changing Sub Spindle C-axis reference point

Thread: Changing Sub Spindle C-axis reference point

Results 1 to 3 of 3
  1. 04-13-2023, 03:34 PM #1
    ethancb1
    ethancb1 is offline Member
    Join Date
    Apr 2023
    Posts
    2

    Question Changing Sub Spindle C-axis reference point

    So, I run a BS32-V and since I have been running this machine the C2 axis has been off by 6.5 degrees exactly when doing work on the back tool post(I will usually just add a g-code to offset the C2-axis for a single program). I was curious as to which parameter changes the C2-axis reference position as I am only able to find the parameter for the main spindle. I would like to permanently offset the c2-axis since it is consistently off by 6.5 degrees.
    Reply With Quote Reply With Quote
  2. 04-14-2023, 07:56 AM #2
    zavateandu
    zavateandu is offline Registered
    Send a message via MSN to zavateandu Send a message via Yahoo to zavateandu
    Join Date
    Dec 2009
    Posts
    952

    Re: Changing Sub Spindle C-axis reference point

    try with the grid shift parameter
    Reply With Quote Reply With Quote
  3. 04-18-2023, 03:18 PM #3
    ethancb1
    ethancb1 is offline Member
    Join Date
    Apr 2023
    Posts
    2

    Re: Changing Sub Spindle C-axis reference point

    That worked, Thank you
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules