Is there a procedure to convert a g code file to a drawing file ?
The g code would be created by Mach 3 digitizing wizard and
possibly imported into bob cad for modifications.
Is there a procedure to convert a g code file to a drawing file ?
The g code would be created by Mach 3 digitizing wizard and
possibly imported into bob cad for modifications.
If your G-code paths represent the true edges of the part, just back plot it in Bobcad. Then save the vectors on your screen to a dxf. I might Though realistically this would only give you one view of the part at a time. Probably easier to just re-draw it.