Re: Tl-1 Alarm 102 cannot reset. Servo amp flashing error
Originally Posted by
Curtis714
Hello, i'm having an issue with my TL-1. i fired it up a few weeks ago and the z axis servo amp blew up taking out a few components on the pcb. i replaced it and performed tests on the servo motor and power leads before firing it up according to haas's own diag instructions which all checked out fine.
today i finally powered it on with the new amp installed and despite it not blowing up the amp is flashing both error and on lings and i am getting 102 servos off alarm which cannot be reset.
any help would be greatly appreciated it's my first cnc and i'm only 22 with not alot of spare cash.
regards, Curtis
It is better to replace the broken servo amp with a new one.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html