584,846 active members*
4,616 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2007
    Posts
    2

    Post Hitachi Seiki Electronic Repair

    Hi folks, we are a company specializing in CNC electronic repairs.

    Call us for Hitachi Seiki repairs:

    1) Servo & spindle motors
    2) Power supplies
    3) Monitors & touch screens
    4) Servo packs & drive units
    5) Control boards, and motherboards

    Free evaluation on Hitachi Seiki Repairs.

    >> Yaskawa Hi-Cup servos rebuilt with new custom retrofit encoder!



    Please visit us at www.controlsandgadgets.com/hitachi-seiki.htm



    Regards,

    Phil Cerrito

    Fast service & great prices!
    Attached Thumbnails Attached Thumbnails hi-cup.jpg  

  2. #2
    Join Date
    Oct 2007
    Posts
    2
    Hitachi Seiki Continued...

    We rebuild the Hitachi Seiki Hi-Cup motors. All rebuilds include a new retrofit encoder too!
    Price: $2,295.00

    Hitachi Seiki Repairs

    PS- We are looking to partner with someone who is knowledgeable about these cnc machines.

    See Picture In Previous Post...

  3. #3
    Join Date
    Mar 2022
    Posts
    4

    Re: Hitachi Seiki Electronic Repair

    hI
    My name is Michal I'm from Poland.
    I have a Hitachi Seiki HT20R. The problem is with the main motor yaskawa drive. There are no errors after the machine is started and referenced. When I try to set RPM in YOG mode, the load meter goes to 110% on the Yaskawa panel, the RUN indicator lights up but the engine is stopped. Can you somehow help ??
    Best regards Michał

  4. #4
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki Electronic Repair

    Hello Michal
    What is the control - i80 Yasnac? When trying to to jog the spindle manually in jog mode, you say the load meter goes to 110% but is not actually spinning?
    Can you move the spindle by hand easily? If the run light is on, the NC has given the command to operate but its not getting feedback from the drive for speed attained, so it sounds like a bad connection, but check the drive for errors. Usually a spindle drive error would show on the NC side. let me know for sure
    john

  5. #5
    Join Date
    Mar 2022
    Posts
    4

    Re: Hitachi Seiki Electronic Repair

    Hello John
    Thank you for your interest in the subject. The control is Seicos L Multi.
    The spindle turns slightly.
    How can I check the disk for errors? No errors are shown on the machine's desktop.
    Please reply.
    Regards Michał

  6. #6
    Join Date
    Mar 2022
    Posts
    4

    Re: Hitachi Seiki Electronic Repair

    Hello,
    Please give me an email. I'll post the procedure I went through.
    Regards, Michał

Similar Threads

  1. Hitachi Seiki HT 20
    By aussiejoeblow in forum Mori Seiki lathes
    Replies: 1
    Last Post: 09-14-2018, 10:07 AM
  2. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  3. Hitachi Seiki Gearbox Repair
    By DPGE Rebuilds in forum News Announcements
    Replies: 0
    Last Post: 06-13-2006, 10:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •