584,842 active members*
4,491 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Rutex Products > trouble with configure and testing R990H servo drive
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2007
    Posts
    93

    Unhappy trouble with configure and testing R990H servo drive

    In the document i insert pictures with messages i get when i use RT990H (DOS) and Rutex Tuner(Windows)
    I am not useing rutex motheboard but i wire it direct to parallel port .

    What to do?
    Attached Files Attached Files

  2. #2
    Join Date
    Aug 2004
    Posts
    2849
    So, there must be a signal (wire) that is used to indicate that a Rutex driver is connected.....or is the software interrogating the driver and it's responding , but your communication back to the computer is mis-wired? Look at the Rutex documentation....look for a driver sense line...

Similar Threads

  1. Trouble with Yaskawa Drive & Servo
    By curtisturner in forum Servo Motors / Drives
    Replies: 4
    Last Post: 04-28-2011, 06:57 AM
  2. Testing Drive Boards
    By bob a job in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 11-22-2007, 11:07 PM
  3. Replies: 2
    Last Post: 04-10-2007, 03:45 AM
  4. Testing for drive enable?
    By murphy625 in forum CamSoft Products
    Replies: 5
    Last Post: 04-06-2005, 10:04 PM
  5. R990h
    By dpaulson in forum Rutex Products
    Replies: 2
    Last Post: 02-22-2005, 04:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •