[klm123]

I need info on getting rs232 dnc working on this control on the back it has 2-25 pin connectors one female labled recorder the outher male unlabled what one do I use to down load programs. I have tried the unlabled port with no luck . I am using bobcad v17 to send program to machine through 9-pin com port on pc and have tried many pin configerations last night I looked at the wiring on the 25 pin male port on the controller
pin 2-white
pin 3-red
pin 6-orange
pin 7-black grounded
pin 20-blue

[gm3211]

Give me a call and I can walk you thru some details on this control.

[ccb]

hello!!
i have same trouble and i need information about anilam crusader 2l
i am new user , please help
thanks!

[qwk racing]

I am having the same problem, what comp port is the correct one to use? the male or female? looking on the inside of the machine the male has about 7 wires that are individual and match my rs232 cable diagram, and the female has a rainbow ribbon wire strip with about 30 wires.