I have a Anilam machine
it doesnt like the Radi or I and J
Thanks~Kojack
I have tried to modify the MPFAN and other posts
I have a Anilam machine
it doesnt like the Radi or I and J
Thanks~Kojack
I have tried to modify the MPFAN and other posts
I have programmed the anilam a few years ago using MasterCam.
It will read standard G code.
I think I used I and J with absolute values not delta values.
Look for that setting in the post processor.
ObrienDave. MasterCam since V6. Gcode since 1983.
The nose you punch today may belong to the butt you have to kiss tomorrow.
-
Stefan Vendin