584,837 active members*
4,934 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > SCM Record 1 manual, infos, downloads ?
Page 1 of 2 12
Results 1 to 20 of 32
  1. #1
    Join Date
    Nov 2007
    Posts
    3

    SCM Record 1 manual, infos, downloads ?

    Hi, as i mention in the post below, we bought used SCM Record 1. This is our first CNC center and we have no experience.
    The problem is: we don't have documentation, the prorgramms, but only electical sheme.

    Maybe some one know where i can found it or send it per email?

    Google search does't bring much.

  2. #2
    Join Date
    Nov 2007
    Posts
    4

    scm record 1 manuals

    Hi have just joined the forum.
    We have got a second hand record 1 and have a parts manual and all the NUM 720 manuals if you still need them.
    regards Asterix13

  3. #3
    Join Date
    Nov 2007
    Posts
    2
    Hi i have been running a record on for the past 10 years. I have parts. num 720 manuals postprosesor for alphcam and a lot of experience.

    regards p_ken

  4. #4
    Join Date
    Nov 2007
    Posts
    4
    Hi p_ken,
    Nice to hear from another record owner, can you help with this problem I have.
    I have been running the scm record 1 for around 6 months but have been unable to get the drip feed working. Following the instructions from the NUM 720 manual does not work.
    So I can only run very small programs + - 1200 lines of code

  5. #5
    Join Date
    Nov 2007
    Posts
    4
    Hi p_ken,
    Nice to hear from another record owner, I have been running our scm Record 1 for the last 6 months using AlphaCam but can not get the drip feed to work. The NUM 720 instructions do nothing so I can only run small file sizes + - 1200 lines of code. This means I have to run jobs broken in small lots. Can you help?
    Regards Asterix13

  6. #6
    Join Date
    Nov 2007
    Posts
    2
    Hi Asterix13

    I have drip fed programs some time ago but cant totaly remember how.. we increased the memory. I will hunt through my notes and try and recall the process.

  7. #7
    Join Date
    Jan 2008
    Posts
    2

    Record manual

    Quote Originally Posted by P_Ken View Post
    Hi i have been running a record on for the past 10 years. I have parts. num 720 manuals postprosesor for alphcam and a lot of experience.

    regards p_ken
    Hi p_ken,
    we recently bought a used scm record 1 (1997) as a second machine for 3-axis jobs and are also missing the manual. Would you mind to send me a manual as well?

    Thanks a lot in advance

  8. #8
    Join Date
    Nov 2007
    Posts
    4

    Smile Num 720 Manuals

    Quote Originally Posted by fictionist View Post
    Hi p_ken,
    we recently bought a used scm record 1 (1997) as a second machine for 3-axis jobs and are also missing the manual. Would you mind to send me a manual as well?

    Thanks a lot in advance
    Hi fictionist,
    Let me have your e-mail details and I will send Num 720 manuals to you.
    File size for 720 is about 14meg.
    I also have Num 820 if needed.

    Do you use drip feed on your machine?

    Regards [email protected]

  9. #9
    Join Date
    Jan 2008
    Posts
    2
    Quote Originally Posted by asterix13 View Post
    Hi fictionist,
    Let me have your e-mail details and I will send Num 720 manuals to you.
    File size for 720 is about 14meg.
    I also have Num 820 if needed.

    Do you use drip feed on your machine?

    Regards [email protected]
    Thanks a lot for the quick response. My email address is [email protected]

    Regards form the sunny Cape Town

  10. #10
    Join Date
    Jul 2009
    Posts
    2
    Quote Originally Posted by asterix13 View Post
    Hi have just joined the forum.
    We have got a second hand record 1 and have a parts manual and all the NUM 720 manuals if you still need them.
    regards Asterix13
    Hi p_ken,


    we recently bought a used CNC machine and are missing the manual.
    Would you mind to send me a manual ?
    My email adress is [email protected]

    THANK YOU VERY MUCH!

  11. #11
    Join Date
    Jul 2009
    Posts
    2
    Hi p_ken,
    i am a member of CNCzone.

    we recently bought a used CNC machine and are missing the manual.
    Would you mind to send me a manual ?
    my email adress is [email protected]
    Thank you very much!

  12. #12
    Join Date
    Jul 2009
    Posts
    1

    num720 manuals

    Hello everybody,

    I also need a copy of num720 manuals in english.
    My e-mail is [email protected]

    Greetings from Greece
    Thanks a lot

  13. #13
    Join Date
    Jul 2009
    Posts
    22

    Xi log and Xi log plus

    Hi All,

    Does any of you lot use Xilog or Xilog plus.
    If you need any help just give me a shout regarding Xilog or Xilog plus.

    Also I have an alphacam post processor for the NUM 720, NUM 750, also for the RECORD 220 I have two post procesors.

    You might need to tweek them.

    Shaun

  14. #14
    Join Date
    Feb 2007
    Posts
    25
    Quote Originally Posted by shaunbirm View Post
    Hi All,

    Does any of you lot use Xilog or Xilog plus.
    If you need any help just give me a shout regarding Xilog or Xilog plus.

    Also I have an alphacam post processor for the NUM 720, NUM 750, also for the RECORD 220 I have two post procesors.

    You might need to tweek them.

    Shaun
    Hi Shaun,
    Do you drip feed to your SCM? I have a Record 2 and am using Ezcam Software. I can send files no problem at all but drip feed has been ongoing issue for the past 12 months. if you have any advice I would be most appreciative.
    Cheers
    Chris

  15. #15
    Join Date
    Jul 2009
    Posts
    22
    Hi Chris,

    I don't use drip feed.
    The programs i use are stored on a server called (k drive).

    I don't store any programs on the control.

    When the programs are opened up in panel mac and run they are actually all still on the server and the programs run fine.

    To do this all you need to do is put your control on the network and access is dead simple

    If you need more info let me know and I'l do a demo.

    Shaun.

  16. #16
    Join Date
    Sep 2009
    Posts
    5
    If anyone has the programming manual for NUM720f i would be very grateful.
    Email: [email protected]

    Best regards

    PS: What kind of a PC and software would be compatible with the Num720f for program storage and easier input? The machine is from Greda

  17. #17
    Join Date
    Jan 2010
    Posts
    0
    i have been running a record 120, and i have hypermill open-mind version 9.6.
    i need a postprosesor.
    can you help ?

  18. #18
    Join Date
    Apr 2008
    Posts
    2
    Hi Shaun,
    I am working on a Record 220 & would certainly like an Alphacam post if you still have one.

    Thanks

    Alan

  19. #19
    Join Date
    Jun 2010
    Posts
    0

    Looking For Manual

    I have a problem qith a record I qith num 720, i looking for manuals.
    Thanks
    Facundo

    [email protected]

  20. #20
    Join Date
    Aug 2010
    Posts
    0
    Raphael Huber from Switzerland is behind SubConsciousMind or short SCM. In 1997, with no musical or technical experience and having no one to ask, he started to teach himself everything he needed to know by simply tweaking till it sounded like music. Since then he has performed live internationally, released two and a half albums and carefully developed his own edgy and characteristic style.

Page 1 of 2 12

Similar Threads

  1. Scm record 220 with NUM 750 Manual
    By harrisres in forum Commercial CNC Wood Routers
    Replies: 20
    Last Post: 06-02-2021, 08:58 PM
  2. Hurco KMB1 Manual Downloads
    By Snipes44 in forum HURCO
    Replies: 11
    Last Post: 08-24-2014, 03:33 AM
  3. A new Site dxf-downloads.de
    By cad_freak in forum WoodWorking Topics
    Replies: 0
    Last Post: 09-10-2012, 05:24 PM
  4. CAD/CAM Softwear Downloads
    By matsci1 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 5
    Last Post: 01-28-2010, 05:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •