584,830 active members*
5,222 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2007
    Posts
    2

    LazyCAM - Mach3 Scale

    We have been cutting using Mach3 and using LazyCAM to convert from DXF to G-Code. We recently updated to LazyCam Pro and now we are having problems cutting to the correct size. It is supposed to cut 18 inches tall and only cuts 4 inches. I have looked through the settings but havent had any luck solving the problem. Any suggestions?

  2. #2
    Join Date
    Mar 2003
    Posts
    35538
    Is the .dxf the correct size? Is the g-code incorrect, or are your steps/unit set wrong?
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Sep 2004
    Posts
    149
    Sorry if this seems like a smartass question, but I don't know anything about Lazycam- is Lazycam open source software? Where would I find the source code?

    Thanks,
    Dan

  4. #4
    Join Date
    Mar 2003
    Posts
    35538
    No, it's not. A demo is included with Mach3.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Need to make scale tire mold for 1/6 scale car
    By thuffner3 in forum Moldmaking
    Replies: 2
    Last Post: 04-29-2008, 06:57 AM
  2. LazyCam
    By wjfiles in forum Machines running Mach Software
    Replies: 0
    Last Post: 09-12-2007, 02:33 PM
  3. Need help with lazycam
    By jeffg in forum Mach Mill
    Replies: 4
    Last Post: 05-31-2007, 05:43 PM
  4. Lazycam
    By dan dimock in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 04-15-2007, 01:44 PM
  5. Help with LazyCam
    By randyf1965 in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 04-26-2006, 11:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •