[Khalid]

I have some confusion with the drawiings by Joes; I have downloaded the DWG format saying Rev-2 where as E-drawings shows Rev-1.
Could some one point out what drawings are final drawings.
I want to cut the materials soon as u geniouses there confirm the great Joes drawings.
Also i do need these 3D drawings in DXF or STL format. could somebody help me in this regard.
Best Regards

[jfc11]

Try this http://mail.lumenlab.com/~joe2000che...TL%20Files.zip

[Khalid]

thanks jfc... what about the plans of joe 4x4 hybrid?

[jfc11]

that i am not sure about he has a thread going on it...he might say something about the plans in it

[DeWalt58]

Khalid,
Joe's plans for the NEW 4x4 are NOT posted yet, he's working on em. Making improvements etc......check the 4x4 tread for up-dates!

Cheers
dewalt58

[Khalid]

Thank u Dewalt58:-)

[zabink]

Hey Khalid,
If you plan on building a CNC router, I suggest you check out this site, www.cncroutersource.com . Not to take away from cnczone.com at all. Even if you are planning on using a set of plans like joes. The Builders Guide section might be helpful. Good luck with your build and keep us posted!

I don't think the 4 x 4 plans by Joe is complete yet.