I'm creating a boom with 4 hinges and trying to use limit angle mates. when I try to use animator or cosmos motion the limit angles either don't work at all, or go ahead and change themselves (eg. I set a max angle of 180, and SW changes it to 360)
anyone else had any problems like this?
Results 1 to 2 of 2
-
11-12-2007, 03:06 PM #1
Registered
- Join Date
- Aug 2006
- Posts
- 259
limit angle mates always changing?
-
11-15-2007, 03:28 PM #2
Registered
- Join Date
- Aug 2006
- Posts
- 259
did some searching around and found out that it just happens.. guess I'll figure out another way to skin the cat..
Reply With QuoteSimilar Threads
-
Mates for V wheels rolling
By Sanghera in forum SolidworksReplies: 32Last Post: 01-28-2008, 06:02 PM -
Mirror Mates in Assy
By CharlesM479 in forum SolidworksReplies: 3Last Post: 05-19-2007, 05:19 AM -
G68 angle rotation
By wevz in forum Daewoo/DoosanReplies: 2Last Post: 09-11-2005, 11:54 AM -
Alum Angle
By Ursine in forum DIY CNC Router Table MachinesReplies: 9Last Post: 05-13-2005, 12:49 PM -
Right angle spindle
By mccafferty in forum CNC Machining CentersReplies: 7Last Post: 07-14-2004, 08:55 PM
Posting Permissions
