I'm very interested in machining and have read up one a website about mini-lathes. Great information but not enough for me. I'd like to jump the gun and know more about CNC lathes or mill but I have no idea where to start.
The only thing I know about CNC lathes or mills are that they are computer controlled...
I tried googling but I got websites which shows books that you have to pay for... kinda hoping I don't have to. But I will if they are a necessity.
Are there any websites out there with comprehensive information on CNC lathes/mills?
Any help is appreciated.
Thread: Newbie reporting in...
Results 1 to 4 of 4
-
11-15-2007, 01:14 PM #1
Registered
- Join Date
- Nov 2007
- Posts
- 3
Newbie reporting in...
-
11-15-2007, 02:00 PM #2
Member
- Join Date
- Jun 2007
- Posts
- 3757
Keep looking at this forum!
You find a good range here.
Something new every day.
Plenty of links appear.Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.
-
11-15-2007, 02:05 PM #3
Registered
- Join Date
- Nov 2007
- Posts
- 3
Btw, did I post in the wrong forum?
Seems like this could have gone into the General Machining Discussion...
-
11-15-2007, 06:01 PM #4
Registered
- Join Date
- Sep 2006
- Posts
- 607
Take a look in the benchtop mill section. Lots of CNC conversions there. Most people put stepper motors on their mills/lathes, but some use servos instead.
Reply With QuoteSimilar Threads
-
Newbie - What do i do
By droddis in forum DIY CNC Router Table MachinesReplies: 1Last Post: 08-06-2007, 01:28 PM -
Newbie-help
By guha045 in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 12-29-2005, 02:43 PM -
newbie: 2.5D v. 3D
By smoker in forum Uncategorised CAM DiscussionReplies: 5Last Post: 10-20-2005, 06:16 PM -
Newbie looks for help! :-)
By Tasos_Eco in forum DIY CNC Router Table MachinesReplies: 2Last Post: 09-23-2004, 09:57 AM
Posting Permissions
