[BeerFizz]

Phil,

I had this on my X2, also. I just fixed it, yesterday. Mine was off by about 5 thou from the front of the table to the back. I loosened the three screws that hold the column pivot-plate to the base, tilted the the column back and put a shim under the pivot-plate. I used a 0.002" feeler gauge for a shim and got lucky the first time. Now, it's under half a thou, front-to-back.

- Don

Fantastic!!!! Thanks for the idea Don...

I'll see if I can take a shot at that tonight.

Phil