I am using Mach3 plasma for my plasma table and Mach 3 mill program for my mill. I cannot enter the g-code edit when using the plasma program but can enter using the mach3 for the mill. Any suggestion on this please.
John
I am using Mach3 plasma for my plasma table and Mach 3 mill program for my mill. I cannot enter the g-code edit when using the plasma program but can enter using the mach3 for the mill. Any suggestion on this please.
John
Try re-choosing Notepad as the editor in the general config screen. Click the browse button.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks alot Gerry for the fix. Everything is fine now.
John