[costR]

I try to find from long time a postprocesor for solidcam turn-mill fanuc
I looking on forum and i see many request for a lot of another postprocesors,but for solidcam almost anybody doesn't have any request for this software

Is solidcam so hard to find any help or any postprocesor?

Also i try to find by google but find a lot of pages in czech language

Can somebody to help me please?

[Daniel_Harris]

Please contact your SolidCAM Reseller first. Or you can contact International support www.solidcamsupport.net

[CNCRim]

you should contact your solidcam tech support, I'm sure they have post similar or can modify one to machine spec.

[costR]

Thank you

The problem is :
Our company buy solidcam only with milling postprocesor
For turn-mill postprocesor i need only few times per year and no help from our reseller in this problem

may be somebody have a turn-mill fanuc postprocesor and share this

[CNCRim]

Post is the heart of CAD/CAM required alot of hard work, I don't think anyone will to share. Beside it is violate software copyright, so I wish you luck.

However, you might find one in Chinese or Russian forum, those country prirate copyright is not strict as the West country....... you might find one.

[costR]

i know only english
i need long time to learn russian or chinesse

[Brakeman Bob]

Use the HELP pages for "SolidCAM help topics - GPP Tool". Here you will find all you need to teach you how to modify your post processor - particularly useful is the "trace" command which switches the output into debug mode. SolidCAM post processors are easily edited in Notepad, but having an editor with backplot is really useful.

I am intrigued as to how you are programming Mill-Turn (presumably you have this option) and your reseller has not supplied the post to go with it. Are you on maintenance? If you are, then a new post shouldn't be any problem at all and SolidCAM will probably have one in the library.

[timotay]

Hi,
I have a post for a fanuc 310I , but what fanuc version do you have maybe i can call the helpdesk in holland and ask for a turn-mill post for you?

[timotay]

Hi,

I have a post for a fanuc 310I, what fanuc version do you have maybe i can help you .
Let me know

[costR]

Thank you timotay for your amability

I need post turn-mill for fanuc 21 i

Right now i'm in Holland and stay till friday 14-12-2007 ,if in this time you can do something please tell to me how sun is possible by forum

Another way is my yahoo messenger adress: stelco1968

Third way ,if you live around Amsterdam can meet you if you wish that

Thanks a lot again

[solidcamx]

report to [email protected]

[wangyayun356]

haha ,I am chinese,but I know English ~：stickpoke