584,805 active members*
4,978 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2007
    Posts
    8

    Collet adapter

    I'm using a Bosch Colt trim router as a cutting tool.

    Can anyone point me to a source for parts/information to adapt the collet for use with bits that have shafts other than the 1/4" diameter that the stock collet holds?

  2. #2
    Join Date
    Aug 2004
    Posts
    3215
    Since we are asking, does anyone also have a source for the Hitachi router.

    Joe

  3. #3
    Join Date
    Mar 2003
    Posts
    35538
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. 1/4 to 1/8 collet adapter?
    By CRFultz in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 04-17-2010, 07:54 AM
  2. 5C Collet Adapter For TL
    By Geof in forum Haas Lathes
    Replies: 12
    Last Post: 12-03-2009, 09:40 PM
  3. 3/8 to 1/2 adapter
    By TMaster in forum Benchtop Machines
    Replies: 1
    Last Post: 07-29-2006, 12:15 PM
  4. collet adapter
    By truman in forum MetalWork Discussion
    Replies: 5
    Last Post: 03-25-2006, 03:43 AM
  5. Adapter for ballscrew
    By ahren in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 03-24-2006, 12:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •