We are looking for sources where one can purchase NEMA size 17 stepper
motors. The motors should be bipolar, however we are open to the
possibility of using unipolar motors. We are looking to spend $25-50
max per motor. We are also looking for motors that are high torque,
in the order of 150 oz-in miminum holding torque, but closer to 200 oz-in would be better.
Thanks
Mike
Results 1 to 2 of 2
-
12-10-2007, 08:53 PM #1
Registered
- Join Date
- Dec 2007
- Posts
- 17
Looking for NEMA 17 high torque stepper motors
-
12-11-2007, 07:53 PM #2
Registered
- Join Date
- Mar 2007
- Posts
- 534
That sounds like a lot of torque for a 1.7" motor, it may exist but doubt you'd find it at that price. Is there an insurmountable problem using a bigger part?
Reply With QuoteSimilar Threads
-
High Torque , High Bandwidth Motor or Servo
By mastabib in forum Benchtop MachinesReplies: 0Last Post: 09-26-2007, 08:09 AM -
Encoders for Nema 23 Stepper motors
By jfc11 in forum DIY CNC Router Table MachinesReplies: 5Last Post: 06-22-2007, 05:14 AM -
Nema 34 Motors 434oz/in / which gecko
By ckrantz in forum Gecko DrivesReplies: 1Last Post: 10-01-2005, 09:21 PM -
Stepper Motor High Torque Low Amp
By Sanghera in forum Stepper Motors / DrivesReplies: 13Last Post: 03-22-2005, 01:16 AM
Posting Permissions
