[DAB_Design]

I was playing around today and started to draw up a machine in Rhino (going to end up being 5 axis). I was curious if anyone has had the chance to model something similiar to a dremel tool (similar in size). If so, would ya wanna share it?

I wasn't really sure if this was the right place for this so excuse me for intruding if it is not.

I don't plan on actually building this machine, I was just bored. Now I gotta finish it!

[kong]

I moved the thread to general cad/cam since you may get a better response in here

[duluthboat]

This is the best source on the web for 3D models in many formats. http://www.3dcontentcentral.com/3DCo...l/cc_frame.asp I couldn’t find what you’re looking for but you will find many others there that will help you with 3D modeling. If you model a Dremel tool put it in the user library so all can use it. If you have good dimensions for one I’ll model it.

Gary

[jgro]

I uploaded a simple model of a Dremel that I made tool to the downloads section. Hope it helps

jgro

[cncadmin]

Originally posted by jgro
I uploaded a simple model of a Dremel that I made tool to the downloads section. Hope it helps

jgro

I uploaded it, so it's their for you.