[replicapro]

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
This is the tap required to thread the block for the 5/8 ball nuts sold by mcmaster carr.

I scored 2 of them for $8 these are $50 each taps and they are new.

[buscht]

How about selling one for $8 and you keep the other for free?

[replicapro]

Let me make my blocks first. Then I'll hook you up

[cncadmin]

You just saved 48.00 may good find!

[cncadmin]

OK if I win this one I will sell if for 1/2 of what I pay for it http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3824599088

[replicapro]

That guy had a buy it now on my auction. He may have wised up.

[cncadmin]

I think you're right they for for 58.00 new.

[replicapro]

Any idea what size drill bit is used for this tap prior to threading?
I think I bought the wrong one.

[Bloy2004]

Originally posted by CNCadmin
OK if I win this one I will sell if for 1/2 of what I pay for it http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3824599088

okay then, I'll let you do the bidding and i'll buy one from you for 1/2 what you paid for it!
Now that's a DEAL! ....unless you go really high

[replicapro]

I figured out the drill bit, its 61/64, Im also bidding on one on ebay, so dont bid its the only one there. I'll pass it on to the next guy after I finish with it.

This is a pretty cool idea to pass tools on like this.

[windsor]

Not quite as good as a deal , but I bought mine from wholesale tool : $22.88
http://wttool.com/Merchant2/merchant...Category_Code=
not sure how to post the link but I pasted the address .