[vetteboy86]

I am looking for some suppliers for plastic material. I am not sure what type I need, but I am thinking it is polyethylene. I will be routing and reverse engraving this plastic material, so I am thinking it will need some type of acrylic cap, various color selection preferably.

Well I am off to search, but thought I would ask here first, for any suggestions, or known suppliers that you all have experience with.

Thanks in advance for the responses.

[dmparrott]

Here are some suppliers you could check out:

http://www.professionalplastics.com

Delvies Plastics

US Plastics Corp

I've ordered products from the last one but don't have any experience with the other two. Hope this helps.

Dennis

[bclark6716]

Here's another one to look at

http://www.artisan-es.com/index.html

[mxtras]

http://www.gravograph.com/usa/index.php

Scott

[skottc]

In California try http://www.ocip.com

[jknoflicek]

Depending upon what you are actually doing -- go down to your local hardware store, Home Depot, Lowes, etc and buy yourself some plexiglass sheet goods and Krylon paint. Not likely will you find a polyethylene with an acrylic cap.
Jim