584,817 active members*
4,660 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Toyoda FV65 / Fanuc11m Parameters
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2007
    Posts
    26

    Toyoda FV65 / Fanuc11m Parameters

    Hello,

    I am wondering is someone could point me to a reference set of parameters for my machine. I have two paper copies of parameters for my machine but they are different and leave me in a bit of a pickle. I found where the last millright kept the date but this machine is missing...dohhhh...

    thanks
    Sean

  2. #2
    Join Date
    Dec 2003
    Posts
    24216
    You need the 10/11 maintenance manual for details on the parameters.
    If there is any in particular, I could look them up.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3
    Join Date
    Dec 2007
    Posts
    26

    Manual

    Yes, I am sifting through the manual now. I suspect to have them all done in 5 minutes....ok, maybe 5 months.

    thanks
    Sean

  4. #4
    Join Date
    Dec 2009
    Posts
    1
    Hello all
    I have a milling machine. it's name Hitachi Seiki. it uses Controller fanuc 11M.
    Model: VA-55
    Fanuc system 11
    Type: A02B-0076-B501
    No. 0408
    year: 1985-04
    Now, it lost parameter, keep relay, timer, counter, data table.
    Can you give me parameter?
    I hope everyone will help me.
    Thanks!
    lest send its my mail: [email protected]

Similar Threads

  1. Toyoda Fa550
    By MIKE 1 in forum Fanuc
    Replies: 1
    Last Post: 08-22-2007, 05:17 AM
  2. toyoda 800
    By dalvinder in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 08-06-2007, 02:59 AM
  3. Toyoda ATC Info.....
    By pauldkeeton in forum Servo Motors / Drives
    Replies: 0
    Last Post: 02-24-2007, 02:50 PM
  4. toyoda problems
    By crack in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 08-07-2005, 03:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •