Repaired??? - How to??
Originally Posted by
diemech
Dear All,
I have a Haas VF1 1992 model with Magnetek DS 307 drive. I have done the setting of the same, but when I give the command of S200 the spindle runs actual at 50rpm and when I give the command of S2000 the spindle runs actual at 500rpm. Even it shows alarm as Spindle Orientation Fault. Please help me if anyone could suggest and solve this problem. Thanks
diemech,
Were you able to get the problem repaired? I am experiencing the same symptoms, Except I have no alarms. What repairs are needed??
Just a good ol' boy, never meanin' no harm.
Joe