512,348 active members
2,355 visitors online
Register for free
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2008

    Adaptive milling fixture help

    I want to introduce adaptive milling to the company I work for as an option to better our tolerances on the turbine blades we manufacture. I need a good fixturing idea to hold the blades in the free state so I can machine the attachments on the inboard and outboard ends.



  2. #2
    Join Date
    Aug 2005
    have you looked into AME the SAFE line of tooling? Lots of cool self aligning clamps and blocks.

  3. #3
    Join Date
    Jan 2008
    I checked out their website after you told me about it. This just may work for my situation. Thanks very much.

Similar Threads

  1. My New Low Cost Fixture
    By petriej in forum Work Fixtures / Hold-Down Solutions
    Replies: 2
    Last Post: 09-10-2007, 05:56 PM
  2. adaptive feedrate
    By camtd in forum EdgeCam
    Replies: 8
    Last Post: 11-13-2006, 11:59 PM
  3. Adaptive clearing algorithm video
    By davidmb in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 05-02-2006, 07:13 PM
  4. Researchers for Adaptive Clearing wanted
    By goatchurch in forum Uncategorised CAM Discussion
    Replies: 5
    Last Post: 03-22-2006, 07:13 AM
  5. Vacumm Fixture
    By SPEEDRE in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 11-24-2005, 05:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts