585,975 active members*
4,477 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > DNC Problems and Solutions > Dynapath 10 replace servo drive & power supply??

Thread: Dynapath 10 replace servo drive & power supply??

Results 1 to 4 of 4
  1. 01-06-2008, 08:36 PM #1
    ken fedirko
    ken fedirko is offline Registered
    Join Date
    Aug 2006
    Posts
    18

    Dynapath 10 replace servo drive & power supply??

    Have TREE J310, missing powersupply SD4-1525-101-3-10 and SD1525-10 Servo Dynamics boards (x3) Have Baldor WTE-4535 40 lb. in. motors.
    Is there an economical replacement ?? Options??
    Reply With Quote Reply With Quote
  2. 01-11-2008, 02:15 PM #2
    dannystooblue
    dannystooblue is offline Member
    Join Date
    Sep 2005
    Posts
    164
    define economical? I have seen 3 axis SD chassis on ebay for a few hundred dollars. Have you checked the motors and screws? there would have to be a reason they took part of the controller. What condition is all of the encoder and motor wiring? Would SD boards plug right back in or did they cut them out?

    Danny
    Reply With Quote Reply With Quote
  3. 01-12-2008, 07:28 AM #3
    ken fedirko
    ken fedirko is offline Registered
    Join Date
    Aug 2006
    Posts
    18
    Wiring intact, ballscrews turn freely, servo motors look good, brushes good. Surplus stores sell SD1525 $500-$575,need 3, power supply $300 so $1800 plus. I've only watched ebay for parts last 10 days. I'll have servo motors tested.
    Reply With Quote Reply With Quote
  4. 01-13-2008, 12:30 AM #4
    HillBilly
    HillBilly is offline Gold Member
    Join Date
    Sep 2003
    Posts
    552
    I have them. I tried to hold up the knee handle I have also ( I thought I seen you post about one of those also.)

    Darek
    Attached Thumbnails Attached Thumbnails ServoDynamics01.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Power supply for Servo DC Question
    By GEORGETOUBALIS in forum CNC Machine Related Electronics
    Replies: 17
    Last Post: 11-19-2007, 12:10 PM
  2. Servo power supply help --Please
    By turbotoys in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 09-13-2007, 09:17 PM
  3. Servo Power supply
    By elogicca in forum CNC Machine Related Electronics
    Replies: 17
    Last Post: 11-22-2006, 04:52 AM
  4. BP series 1 Boss 4 to EMC Gecko drive Power Supply retrofit
    By arriflex in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 10-06-2006, 06:43 PM
  5. Sizing servo power supply?
    By bsc52001 in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 01-31-2004, 06:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules