We need to come up with the original Allen Bradley 9/Series ODS disks. There is two discs. Can anyone help with this?
Thanks,
Sheldon
We need to come up with the original Allen Bradley 9/Series ODS disks. There is two discs. Can anyone help with this?
Thanks,
Sheldon
Send your e-mail address so I can send a zipped copy to you, also which 9 series are you running? I have an LSN-10 Okuma lathe with a 9-240 control on it. I need a copy of the PAL ladder logic for this machine, battery went dead and the PAL evaporated.
Larry Reiss Omaha NE 402 218 3288 [email protected]
[email protected]
Call me at the shop at 863-858-3338. I think I have what you need.
Gecker
I need to come up with original Allen Bradley 9/240 ODS. I am to repair Lucas Horizontal Boring retrofitted. Can anyone help with this?
The first display of the monitor was like this;
xyzw SERVO AMP FE LIMITS
ALLEN-BRADLEY 9/240 CNC-COPYRIGHT (06/03/92)
REVISION RL 3.03
I/O FIRMWARE REVISION NO AO
ANALOG SERVO FIRMWARE REVISION NO. 0.07
ANALOG SERVO FIRMWARE REVISION NO. 0.02
Please send the price for the software at the following address:
[email protected]
I am also in need of the original ODS disk for Allen Bradley controller. Is the Professor still here, or can someone else help?
please email ma a copy of ODS.
[email protected]
please email ma a copy of ODS.
[email protected]
send me 9/230 series ods software. [email protected]