585,962 active members*
4,119 visitors online*
Register for free
Login

Thread: Jerky Movement - Syil X3 Mach 3

Results 1 to 2 of 2
  1. 01-09-2008, 09:23 AM #1
    Megaplow
    Megaplow is offline Registered
    Join Date
    Nov 2007
    Posts
    87

    Jerky Movement - Syil X3 Mach 3

    Hello,
    I had my X3 machine all set up using mach3. Things were nice for one day. Then after several reinstalls and unit resets things are back to normal. Now, when I run a cnc program, the machine moves in bursts, not smooth movements. Is there some sort of command duration or movement thing that is out of whack? It moves about 2mm then stops, then 2mm then stops. My z is considerably slower than the x and y. All the motor tuning values are the same.

    Frustrated Newbe,
    Joe
    Reply With Quote Reply With Quote
  2. 01-09-2008, 04:10 PM #2
    wwendorf
    wwendorf is offline Registered
    Join Date
    Jan 2007
    Posts
    869
    I would call Richard at Syil America right away. I had the same problem when I got my SX3. One of the circuit boards went bad during shipping. I had a new one from Richard in 2 days and it fixed my problem.

    Wade
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mach 3 Jog movement question
    By Drakkn in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 11-30-2007, 11:21 PM
  2. Jerky Movement
    By elogicca in forum Mach Mill
    Replies: 5
    Last Post: 11-22-2007, 03:19 AM
  3. New W.XP and Mach 2.48 no movement
    By hugo carradini in forum Machines running Mach Software
    Replies: 3
    Last Post: 10-14-2007, 05:44 PM
  4. Jerky Movement on Interact 1 MK2
    By palikalsi in forum Bridgeport / Hardinge Mills
    Replies: 10
    Last Post: 04-27-2007, 11:41 PM
  5. Jerky Z axis????
    By bill south in forum Benchtop Machines
    Replies: 7
    Last Post: 09-10-2006, 03:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules