547,349 active members*
2,581 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Dec 2007
    Posts
    26

    EDIT REJECTED

    Hello,

    I get an edit rejected error when I try to punch out my parameters.

    Does anyone have an experience with this error. I looked through my manual but did not see anything on it.

    I believe it has come up with the mdi functions insert, edit etc.

    thanks
    Sean

  2. #2
    Registered
    Join Date
    Jun 2007
    Posts
    43

    We've all been there

    Possible edit rejected problems on punching out are, not being in the correct mode, Edit, program lock key in the wrong position.
    These are the norm, if this doesn't help, let us know the control type and I will try and jog my memory a bit more. Search the forum (Fanuc) for comms problems, lots of helpful tips/advice there
    gem

Similar Threads

  1. Post edit help?
    By yanzeek in forum Surfcam
    Replies: 12
    Last Post: 09-03-2009, 03:28 PM
  2. Rejected part because of Servo fault?No more!
    By kolokithas in forum DeskCNC Controller Board
    Replies: 7
    Last Post: 02-20-2008, 05:53 AM
  3. Cimco Edit
    By alain aleman in forum Haas Mills
    Replies: 2
    Last Post: 06-14-2007, 11:44 PM
  4. Can't edit on OT fanuc!!!
    By steedspeed in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 17
    Last Post: 06-04-2007, 05:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •